light engraving and milling machines manufacturer Anchor screws should be used for fixing on the foundation. During installation, place the anchor screws we provide according to the corresponding positions, and slowly lower the hoisted machine tool so that each horizontal adjustment bolt on the machine tool is penetrated. in the anchor screws.

Since the horizontal adjustment bolts cannot be used at this time, please first use wedge-shaped horns to roughly adjust the level of the machine tool, and then use cement to fix the anchor screws. After the machine tool is installed, it meets the following requirements:

a) The distance from the workbench plane to the ground plane is 800mm.

After the cement solidifies, remove the wedge-shaped horn and use the machine tool level adjustment bolts to fine-tune the machine tool level.

0.02/1000mm level should be used

Since the mud hole will sink slightly before solidification, the machine tool level should be rechecked and necessary adjustments made 6 months after the machine tool is installed. It should be rechecked and adjusted once a year thereafter.

light engraving and milling machines manufacturer https://www.talentcnc.com/CNC-engraving-and-milling-machine